In order to finalize the ECU tester board design I needed to know how much current the ECU requires. I […]
In this topic I will describe how the D-Jetronic basic fuel injector pulses are created with the aid of circuit […]
I previously wrote about how to simulate an MPS in KiCAD. Here is how to tweak the model to match […]
This is version 2 which allows the vacuum to be varied over time during the simulation. The circuit simulator – […]
I recently started to suspect that I had made a mistake with this simulation, getting the timing of the outputs relative […]
The TPS takes the position of the throttle linkage and generates four outputs: When the throttle is 2% or less […]
Here is a simulation of the air and coolant temperature sensors using SPICE and KiCAD. All of the heavy lifting […]
