This is a manual from Mercedes used to educate workshop technicians in the 1970s on the new D-Jetronic electronic fuel […]
The two coils are wound around a plastic spool with four wire connectors mounted onto the spool. The spool is […]
The aneroid cell pushes on the core, pressing it rearwards into the coil. A spring provides an opposing force and […]
Here are the details of the male connector found on the engine wiring harness.
Here are the technical details of the edge connector on the ECU.
We know that the MPS changes the pulse width based on the manifold vacuum and the atmospheric pressure. Testing for […]
In this topic I will describe how the D-Jetronic basic fuel injector pulses are created with the aid of circuit […]
I previously wrote about how to simulate an MPS in KiCAD. Here is how to tweak the model to match […]
This is version 2 which allows the vacuum to be varied over time during the simulation. The circuit simulator – […]
I recently started to suspect that I had made a mistake with this simulation, getting the timing of the outputs relative […]
Verified by MonsterInsights