The KiCAD 6 project for the Bosch 005 ECU used in the Mercedes-Benz 350SL and 450SL with simulation is now […]
Here is a complete circuit diagram, the result of putting the previous idea posts together. At the time of writing […]
Because all four signals have a known, fixed relationship to each other, we just need to know when one of […]
Following on from my previous post starting this idea, next is how to send the pulses to the ECU. The […]
Here is an idea for electronic version of the pulse generator. The pulse generator uses blocks that wear down with […]
I modified the design so that it has usable handles even if the wires are routed to the side to […]
I have finally worked out the magic formula to 3D print a female ECU connector using cheap and easily obtainable […]
Over the decades the gold surface on the PCB becomes worn and could lead to problems with idle and acceleration. […]
This is a manual from Mercedes used to educate workshop technicians in the 1970s on the new D-Jetronic electronic fuel […]
